Stator Coil for Suzuki DR125 DR200 | OEM 32101-42A40


Stator Coil for Suzuki DR125 DR200 | OEM 32101-42A40

Item Condition: New

Brand new aftermarket stator

  • Direct replacement to your original unit.
  • Plug-and-play, direct fit, easy installation.
  • Highest grade lamination materials.
  • Highest grade copper windings, resistant to 200°C.
  • Pick up pulsar coil included.
  • Connector included.
  • Rubber grommet included.
  • All products shipped are tested.


We have even included the opposite connector (main harness side) as we know these are often melted/corroded/defective & a major cause for repettive electrical issues.


Used on the following applications:

  • Suzuki
    • DR125SE (1994-96)
    • DR200SE (1996-13)


Replaces these genuine manufacturers part numbers:

  • Suzuki
    • 32101-42A30
    • 32101-42A40


For a full application / interchanges listing, please see our part Application / Fitment section below.

SKU: RMS010-100087

£164.60 (£137.17 exc. VAT)

Lead Time: Aprox 1 working day

Item in stock



Unit Type Part
Voltage 12
Dimension Internal diameter: 35.52mm
External diameter: 92.97mm
Thickness: 16mm
Length of wires:
  • stator to grommet: 100mm
  • grommet to plug: 900mm
Length of pickup coil's wire to grommet: 100mm
Mounting holes centre to centre: 30mm
Other Number of wires: 5
Number of plugs: 2
Number of pins: 5

Wire to wire resistance:
Alternator: Yellow to Yellow = 0.6ohms +/-20%
Pickup: White/Green to White/Red = 100ohms +/-20%
Brief Suzuki DR125SE DR200SE (1994-13)
Installation Before installing your new stator
  • Check the AC output of the stator.
  • Replace any burnt or corroded connectors on the stator & regulator
  • Check & repair any melted wiring.
  • Use hi-temp dielectric grease on all connectors
Our stator may use a different colour code to your original.
All of the wires are installed in the correct ordered; please do not change any of the wiring confirgurations.
The stator is designed as a direct plug-in replacement & should be used as such.
When bolting the stator in, always use a locking compound.
If our stator includes a pickup coil, always make sure the air gap is correct upon installation; we suggest as close as possible no less than 0.010".



    Limited 12 months Warranty Offered on all products except CDIs.

Click and collect | Order by 3pm for same day dispatch

Click the model to see other products for that vehicle

Part Application / Fitment

Model Code Year Engine
DR125SE RMS010-100087 1994 SUZUKI 125cc
DR125SE RMS010-100087 1995 SUZUKI 125cc
DR125SE RMS010-100087 1996 SUZUKI 125cc
DR200SE RMS010-100087 1996 SUZUKI 199cc
DR200SE RMS010-100087 1997 SUZUKI 199cc
DR200SE RMS010-100087 1998 SUZUKI 199cc
DR200SE RMS010-100087 1999 SUZUKI 199cc
DR200SE RMS010-100087 2000 SUZUKI 199cc
DR200SE RMS010-100087 2001 SUZUKI 199cc
DR200SE RMS010-100087 2002 SUZUKI 199cc
DR200SE RMS010-100087 2003 SUZUKI 199cc
DR200SE RMS010-100087 2004 SUZUKI 199cc
DR200SE RMS010-100087 2005 SUZUKI 199cc
DR200SE RMS010-100087 2006 SUZUKI 199cc
DR200SE RMS010-100087 2007 SUZUKI 199cc
DR200SE RMS010-100087 2008 SUZUKI 199cc
DR200SE RMS010-100087 2009 SUZUKI 199cc
DR200SE RMS010-100087 2013 SUZUKI 199cc

Interchanges / Cross References

Manufacturer No Manufacturer Name
32101-42A30 Suzuki
32101-42A40 Suzuki


Useful Products

Trade User? Login or Register for discounted prices